Dual mining 390x

ArdiansArdians Member Posts: 7
Please tell me best combination of dual mining
Etc+sia
When i start to dual mine, my etc hash falls from 164 to 145

Please help

Thank you

Comments

  • rmhrmh Member Posts: 410 ✭✭✭
    Play with this parameters:

    -ethi Ethereum intensity. Default value is 8, you can decrease this value if you don't want Windows to freeze or if you have problems with stability. The most low GPU load is "-ethi 0".
    Also "-ethi" now can set intensity for every card individually, for example "-ethi 1,8,6".
    You can also specify negative values, for example, "-ethi -8192", it exactly means "global work size" parameter which is used in official miner.

    -dcri Decred/Siacoin/Lbry/Pascal intensity, or Ethereum fine-tuning value in ETH-only ASM mode. Default value is 30, you can adjust this value to get the best Decred/Siacoin/Lbry mining speed without reducing Ethereum mining speed.
    You can also specify values for every card, for example "-dcri 30,100,50".
    You can change the intensity in runtime with "+" and "-" keys and check current statistics with "s" key.
    For example, by default (-dcri 30) 390 card shows 29MH/s for Ethereum and 440MH/s for Decred. Setting -dcri 70 causes 24MH/s for Ethereum and 850MH/s for Decred.
Sign In or Register to comment.