3 risers off 1 EVGA molex perif cable

Miner8472Miner8472 Member Posts: 109
Can I run 3 risers off of 1 EVGA molex perif cable (1 for each connector on the cable)? The perif cable would be plugged in to the SATA or Perif slot on the EVGA Gold G2 850W.


  • mtbmtb Member Posts: 23
    Its better to have only 2 risers on one cable.
  • Miner8472Miner8472 Member Posts: 109
    ok ty. I am just thinking that it will be ok because these are 3 gtx 1060 and I will underpower them to 75W each. They will also have a 6 pin supply to their extra 6 pin connector but that is also split between 2 cards. All using proper EVGA cables however.

    The VGA cables all have the capacity to supply all the power safely, I just don't know how electricty works and how much current will end up going down the molex cables and how much current that molex can take.
Sign In or Register to comment.