BIOS ROM share and I will not be owed ASUS ROG-STRIX-RX580-O8G-GAMING 8GB

MrarminMrarmin Member Posts: 7
Hi Guys,

I am mining ETH via claymore dual mining soft and mining only ETH. I am using Xubuntu16.04.3. GPU: ASUS ROG-STRIX-RX580-O8G-GAMING 8GB . Memory Samsung.
I would like to ask if someone could give me stable and lower Watt`s + max performance Mh/s modded BIOS GPU ROM , and if it work 24Hours with no crashes I will be grateful for that and I will Mine to your account for 24Hours with my modded rig.
For now I have default GPU Bios with no modifications,
My current and stable hash rate:
ETH: GPU0 22.019 Mh/s, GPU1 22.011 Mh/s, GPU2 22.019 Mh/s, GPU3 22.025 Mh/s, GPU4 22.035 Mh/s, GPU5 22.010 Mh/s

My hardware:
GPU Driver: AMDGPU-Pro Driver Version 17.30 for Ubuntu 16.04.3​
1xCPU: Intel Celeron G3930
1xRAM: Kingston HyperX Fury Red 8 GB, DDR4
1xUSB: SanDisk Ultra Fit 64GB US B3.0, 128-bit AES

Waiting your message via skype: how-highh


  • magohatamagohata Member Posts: 8
    edited October 2017
    Hello, I have the same card.

    My rig has 5 cards but I have one that hashes less than the others.

    I Flashed my self all my cards and i was able to do 29.xx MH/S on 4 cards and the other do a little less.

    I use Clamore dual miner v10, with the AMD BlockChain driver august 23.

    In the bat file I use 1175 gpu clock, 2150 mclock and 850 for the mvcc , on GPU-Z reports like 120w per card.

    i can share my bios rom with you if you wait until i get home.

    My hardware:
    5xGPU: ASUS ROG-STRIX-RX580-8G-GAMING 8GB (Samsung memory)
    Mobo: ASUS PRIME Z270-A
    CPU: Pentium G4560
    RAM: Corsair Vengeance LPX 8GB DDR4
    SSD: Samsung 850 EVO 250GB (Windows 10 Pro x64)
    2xPSU: EVGA 850 G2 80 plus gold

    Post edited by magohata on
  • MrarminMrarmin Member Posts: 7
    Hi, sure. I will test and then let you know results and if its ok I will mine for you 24hrs. Waiting your link to Bios.
  • MrarminMrarmin Member Posts: 7
    Nobody can help ? :)
  • magohatamagohata Member Posts: 8
    edited October 2017
    Hi, sorry for the delay

    This is one of my modded rom!AvNUoXaEH7GNxzU8q_7Cvsiwe7BI

    Please make a backup of every one of your cards before tried to apply the rom

    I use nanopool for mine

  • MrarminMrarmin Member Posts: 7
    Ok thanks. I will try and will let you know !
  • MrarminMrarmin Member Posts: 7
    I looked at your BIOS. So you modified only MHz Timing Vaue copied from 0:1750 to 0:2000 . Sorry man but its snot upgrade :) I could suggest you to change two more values and you will get +3MH each. So change Memory value from 2000 to 2150 and you will be happy.
    I need modded bios to get less electricity, so would be perfect to get BIOS with less voltage/less gpu MHz and mV.
  • magohatamagohata Member Posts: 8
    OK no problem, I only modded that value, because on my .bat file I set the parameters for:

    -cclock 1175 -mclock 2130 -cvddc 850 -mvddc 850

    Note: if i set -mclock to 2150 sometimes i get some errors

    but I dont know if under linux you can do that
  • MrarminMrarmin Member Posts: 7
    For that reason that I m using Linux I need everything modified only in ROM :(
Sign In or Register to comment.