RX 460 35W -14Mh

jsanzspjsanzsp Member Posts: 195 ✭✭
edited April 2017 in Mining



Post edited by jsanzsp on

Comments

  • uzzyuzzy Member Posts: 33
    Put voltage -6, nd test using decred mining too.
    put here ur benchmark. Thx
  • cvekscveks Member Posts: 62
    wall meter my friend. Measure with wall meter .
  • MrN1ce9uyMrN1ce9uy Member Posts: 190 ✭✭
    What brand/model is the GPU? What memory type?
  • jsanzspjsanzsp Member Posts: 195 ✭✭
    edited April 2017
    MrN1ce9uy said:

    What brand/model is the GPU? What memory type?

    Sapphire radeon nitro rx 460 4gb, micron memory (the worst) 1500 strap

    Unloncked shaders to 1024


    11/Mh out the box and 55W

    14/Mh.35w not bat for cheap gpu
    Post edited by jsanzsp on
  • cidmocidmo Member Posts: 446 ✭✭✭
    thats just 35w to the gpu
    theres still memory and fans wattage
    thats prolly around 70-85w at the wall
    i have my 470s do 27Mh and they run at 55w in gpu-z
  • emanaemana Member Posts: 4
    cidmo said:

    thats just 35w to the gpu
    theres still memory and fans wattage
    thats prolly around 70-85w at the wall
    i have my 470s do 27Mh and they run at 55w in gpu-z

    out of the box i get 415W on the wall on a rig with 5xRX460
    Dual mining ETC and PASL - 55MH/s and 750MH/s running Claymore 9.7
  • emanaemana Member Posts: 4
    edited July 2017
    From what i've experienced these results are quite accurate. I've done some bios modding and got similar results but i had to go down a bit for dual mining because of power issues. Got the same 35W per card on a 4 cards rig. Dual mining 355W on the wall, ETH only 302W. 51/1500 ETH/DCR
  • jsanzspjsanzsp Member Posts: 195 ✭✭
    emana said:

    From what i've experienced these results are quite accurate. I've done some bios modding and got similar results but i had to go down a bit for dual mining because of power issues. Got the same 35W per card on a 4 cards rig. Dual mining 355W on the wall, ETH only 302W. 51/1500 ETH/DCR

    Thank you for sharing your results, it is a low consumption minin rig
  • PalladanPalladan Member Posts: 24
    Will be testing some 560's tonight to see how they go. hopefully get something very close to this.
  • jsanzspjsanzsp Member Posts: 195 ✭✭
    Palladan said:

    Will be testing some 560's tonight to see how they go. hopefully get something very close to this.

    its the same gpu, with more shaders....I believe
  • emanaemana Member Posts: 4
    jsanzsp said:

    Palladan said:

    Will be testing some 560's tonight to see how they go. hopefully get something very close to this.

    its the same gpu, with more shaders....I believe
    i unlocked my 460 shaders, 896 to 1024. I believe that even better results can be achieved if you mine only ETH because i adjust mine to dual mining.
Sign In or Register to comment.