Was showing my miner off to my dad last night and bumped the rig. Upon bumping, the pc froze and had to be forcibly shut down. Upon reboot, I'm facing a black screen from any video connected to any of my gpus. I can remote-in using teamviewer and see that windows boots with onboard graphics and runs normally, albeit a bit sluggish. Further when I go into device manager it correctly detects and identifies all of my gpus. If I launch my miner, it immediately crashes.
First I tried switching hdmi cable around to multiple gpus on my risers – same issue. Then disconnected all of my risers and plugged in one of my gpus straight into the main pcie – same issue.
I’m hoping it’s a loose power cable or something? When I get home I plan on disconnected all power and trying to get one card booting up normally. May even pull the gpu off my main rig and see if it get past this black screen issue.
MSI z170A Gaming M5
I-3 6100
4x rx 470 PC Red Devil
I had been running cool and perfectly smooth for about a week.
Thoughts? Prayers? Suggestions?
0 ·
Comments
It appears I can't hold a connection to either the servers or the stratum? It will bounce around servers looking for a stable connection but constantly drop. The gpu's run and my hash rate is about what I would expect.
Types of error seen
ETH: Connection lost, retry in 20 sec...
Cannot resolve eth-us-east1.nanopool.org
ETH: Statum - Cannot connect to eth-us-esat1.nanopoool.org:9999
ETH : Stratum - Failed to conneecet, rety in 20 sec...
Recieved Error :{"jsonrpc" : "2.0", "id" :4, "error" : {"code" ; -32700, "message" : "Worknotfound"}}
The last one feels odd?> Any thoughts?
Socket was closed remotely (by pool)
ETH: Connection lost, retry in 20 sec...
Never had any sort of connection problem in any other application...
ETH: Received error: {"jsonrpc":"2.0","id":4,"error":{"code":-32700,"message":"Worknotfound"}}