Hi,
I thought I share this moded bios for this Gigabyte model (
http://www.gigabyte.com/Graphics-Card/GV-RX480G1-GAMING-4GD#kf)Stable hashpower 29.3 MHS/ETH with 840 MHS/DCR stable. (-dcri 29)
WattTool settings.
1095/890
2070/890
Voltage offset depends on ASIC quality. Some can take -22 others -12 , -10. Just play around with settings. You can go higher with core and mem clocks it can go faster, but it is starting to give memory errors in HWINFO above these settings.
Just flash with atiflash. Use older non RELIVE drivers.
if you have questions feel free to ask.
Comments
With your parameters my fans have high speed presentage (67%-69%).
So I decreased memory freq to 2030.
28,50 ETH/ 820 DCR.
FAN speed ~58%
@change no you can't as ecs87 said if it is hynix you can use it for hynix memory only. no samsung. but you can do the mod yourself if you want...use polaris editor and copy memory straps. for rx480 1750 to 2000 and for rx 470 1625 to 1750 and to 2000.
when you say:
WattTool settings.
1095/890
2070/890
is that GPU clock and mem clock? sorry im rlly new in this world, and it means that i can play in that range? from 1095 to 890 and 2070 to 890?
im still having issues with the drivers... cant keep crimson 16.9.2, windows is fucking updating my drivers, I'm going to disable windows updates, but im going to sleep now greetings!
Can you give me an idea on looking at gpuz asci quality as to what volate to maybe play around with and when you say -12 or so with voltage are you suggesting the changes in wattTool for gpu or memory?
My fans run at 100% right now, with your settings to keep the card around 72%..
Last question in window 10, in atiflash the card shows up as ati polarius 10 ?? I have run the atikmdag-patcher
Running Windows 10 64 bit, Z170A Gaming Pro Carbon with ATI 16.12.1 drivers.
Thanks again for your time and hard work.
wattTool.exe card1.ini card2.ini card3.ini etc as many cards as you have. don;t forget to change in the lat card ini file the NOGUI=0 to NOGUI=1 if you don't do this wattTool will pop up and won't let the miner program start.
Can you help me?