31.1MH Eth 575MH DCR dual on MSI Rx 480 8gb

Comments

• yodi Member Posts: 265 ✭✭

  April 2017

  and what about cosummation at the wall ?

  0 · Share on FacebookShare on Twitter
• techtot Member Posts: 339 ✭✭✭

  April 2017

  I too would like to know the watt/power ratio. Also how much w/o dual mining?

  0 · Share on FacebookShare on Twitter
• midoprince Member Posts: 198 ✭✭

  April 2017

  u mean 160watt / 31.1 mh ?

  0 · Share on FacebookShare on Twitter
• Wolf0 Member Posts: 329 ✭✭✭

  April 2017 edited April 2017

  See GPU 4 (NSFW): https://ottrbutt.com/tmp/ethwolf-03212017.jpg
  
  Some cards just are really good.

  Post edited by Wolf0 on April 2017

  2 · Share on FacebookShare on Twitter
• techtot Member Posts: 339 ✭✭✭

  April 2017

  @midoprince, yes thanks, so dual mine you use 160 watts per card at wall ? (subtracting the system) or is that just ether only?

  1 · Share on FacebookShare on Twitter
• midoprince Member Posts: 198 ✭✭

  April 2017

  techtot said:

  @midoprince, yes thanks, so dual mine you use 160 watts per card at wall ? (subtracting the system) or is that just ether only?

  for dual not only eth

  0 · Share on FacebookShare on Twitter
• midoprince Member Posts: 198 ✭✭

  April 2017

  Wolf0 said:

  See GPU 4 (NSFW): https://ottrbutt.com/tmp/ethwolf-03212017.jpg
  
  Some cards just are really good.

  lol wolf u like naked punnies
  
  and wow the second card 7k rpm and running on 82C
  
  i got that on 1335 core 2265 mem on reference sapphire but not stable with claymore
  
  ur miner getting same speed as claymore ?
  
  i wish u can make more stable , smart miner for windows that can restart the system if the driver stop responding or give memory errors
  
  

  0 · Share on FacebookShare on Twitter
• midoprince Member Posts: 198 ✭✭

  April 2017

  costis said:

  Some pictures made with GPU Z....see CLOCK AND SETTING THE MEM

  its showing 90 ~ 100 watt gpuz with dual
  i will post the printscreen later

  0 · Share on FacebookShare on Twitter
• Mikesco3 Member Posts: 10 ✭

  April 2017

  midoprince said:

  well it seems those cards are super like sapphires
  
  i have tested this msi bios
  
  on MSI Rx 480 8GB cards like this http://amzn.to/2n4xbH8
  
  and got 31MH ETH 575 DCR with 56C average temp
  
  
  
  
  did not test the watt yet but im sure its like 140 to 160 watt pwr card
  
  tell me your feedback with the bios on msi
  

  I crunched your numbers using
  https://cryptocompare.com/mining/calculator/eth?HashingPower=124.4&HashingUnit=MH%2Fs&PowerConsumption=861&CostPerkWh=0.12
  And assuming you had the same watt consumption on your mobo and hd as I do (260W) I calculated you'd be pulling about 860W from the wall
  
  I suggest you change plans.... Here are my current settings.. and I'm pulling 570 W from the wall (the whole rig not including monitor because I do unplug that and turn it off... )
  
  
  
  I'm using Claymore's v9, AMD driver version 16.12.2 and the within wattman I did these settings:

  GPU		State 0	State 1	State 2	State 3	State 4	State 5	State 6	State 7
  Freq MHz	=	N/A	610	910	1075	1145	1190	1235	900
  Volt Crtl mV	=	N/A	818	825	950	1012	1062	1112	800
  MEMORY
  Freq MHz	=	N/A	2000	N/A	N/A	N/A	N/A	N/A	N/A
  Volt Crtl mV	=	N/A	800	N/A	N/A	N/A	N/A	N/A	N/A
  FAN
  Speed RPM	=	2000	2000
  Accoustic MHz	=	910
  TEMPERATURE
  Temp C	=	90	72
  Power Limit %	=	-30

  1 · Share on FacebookShare on Twitter
• Mikesco3 Member Posts: 10 ✭

  April 2017 edited April 2017

  Any donations for my efforts can be sent to:
  ETH = 0xb1cc636288f5c0dd899c3c92bb38e5b22bd3ae84
  
  DCR = Dsi3GuLFQpcincmzwD99exEcWQ2pWusLN8i
  
  BTC = 1KEZXnDH65SQonEEdqbm6zk1Qg8gDePFHr
  
  Happy mining !!!

  0 · Share on FacebookShare on Twitter
• midoprince Member Posts: 198 ✭✭

  April 2017

  Guys after the new Claymore update 9.2 make the -dcri 30 to 18 till u get the 31mh again

  0 · Share on FacebookShare on Twitter
• fveilleux Member Posts: 15 ✭

  May 2017

  Claymore 9.2 is exactly 0.01 mhs slower on ALL my GPUs... Not sure what is the deal but I'll continue using 8.

  0 · Share on FacebookShare on Twitter
• chinpow Member Posts: 37 ✭

  May 2017

  Hum hum my hashrate on dual mining ETH+DCR MSI Rx480 gaming x 8go
  
  
  

  1 · Share on FacebookShare on Twitter
• midoprince Member Posts: 198 ✭✭

  May 2017

  chinpow said:

  Hum hum my hashrate on dual mining ETH+DCR MSI Rx480 gaming x 8go
  
  
  

  try -dcri 23
  or tweak using + -

  0 · Share on FacebookShare on Twitter
• wrestlemining Member Posts: 1 ✭

  May 2017

  Good MSI Rx 480 8gb

  1 · Share on FacebookShare on Twitter
• olib Member Posts: 7 ✭

  May 2017 edited May 2017

  midoprince said:

  chinpow said:

  Hum hum my hashrate on dual mining ETH+DCR MSI Rx480 gaming x 8go
  
  
  

  try -dcri 23
  or tweak using + -

  Can you add gpu-z screen ? What core and mem for eth 30Mhs/925 dcr ? I have msi rx480 8gb gpu too. With 1353/2200 i get just 27.3 Mhs eth. But 130-140W at card. Bios file up i see have replaced 1750 to 2000 mem . Some gpu and mem mV mods. Ths.

  Post edited by olib on May 2017

  1 · Share on FacebookShare on Twitter
• Maguary Member Posts: 59 ✭

  May 2017 edited May 2017

  
  
  
  What about GPU Memory Errors on HWinfo?
  
  

  Post edited by Maguary on May 2017

  0 · Share on FacebookShare on Twitter
• Heliox Member, Moderator Posts: 634 mod

  May 2017

  chinpow said:

  Hum hum my hashrate on dual mining ETH+DCR MSI Rx480 gaming x 8go
  
  
  

  Now do that on a 6 x gpu rig and you're doing great.
  
  
  
  Old picture, stabilized at around 90 watt (gpu-z), not dual mining because i want my gpu's to have a long and nice life
  
  Greetings!

  0 · Share on FacebookShare on Twitter
• olib Member Posts: 7 ✭

  May 2017

  Do you use mod bios ? What core and mem settings ? Ths.

  0 · Share on FacebookShare on Twitter
• fveilleux Member Posts: 15 ✭

  May 2017

  Mostly, how long it can hold 32 Mhs ?, cuz you have one gpu with a fan 70% after just 3 minutes of uptime, this dont look good for longtime run !
  

  0 · Share on FacebookShare on Twitter
• midoprince Member Posts: 198 ✭✭

  May 2017

  @Heliox do costume timings editing for memory straps
  no one can make very accurate edit like him

  0 · Share on FacebookShare on Twitter
• Heliox Member, Moderator Posts: 634 mod

  May 2017

  fveilleux said:

  Mostly, how long it can hold 32 Mhs ?, cuz you have one gpu with a fan 70% after just 3 minutes of uptime, this dont look good for longtime run !
  

  I had it running for over 2 weeks.

  0 · Share on FacebookShare on Twitter
• ecs87 Dekalb, ILMember Posts: 339 ✭✭✭

  May 2017

  fveilleux said:

  Mostly, how long it can hold 32 Mhs ?, cuz you have one gpu with a fan 70% after just 3 minutes of uptime, this dont look good for longtime run !
  

  70% is fine IMO. Anything over 80 is rumored to affect the life of your fans much more...meh

  0 · Share on FacebookShare on Twitter
• cw_helper Member Posts: 3 ✭

  July 2017

  In my wattamen I cant set these values. Do I need modded bios 1st? I know with the bios will be better, but my question is if the modded bios unlock that option in Wattamen?

  0 · Share on FacebookShare on Twitter