try core1160 mem1250. my ethos 390 rig runs stable with those settings. if you're feeling lucky, bump up the core another 10-25. worst thing that could happen is error messages.
Can someone tell me if is ok to mix up the gpu's producer or i should stick with asus strix only ? i found some cards for good prices msi, sapphire etc..
@ciprianpt 1175/1600 if yours are stable, use those numbers. I have 6xMSI's and they clock at 1150/1500 stable for days and still run 90mh/s. I would also change your fan speeds on the individual GPU's lower until the temps are around 70+C. It will save the fans and a tiny bit of power. You can mix cards but only AMD with EthOS. Its best to keep similar speed cards together.
@ciprianpt 1175/1600 if yours are stable, use those numbers. I have 6xMSI's and they clock at 1150/1500 stable for days and still run 90mh/s. I would also change your fan speeds on the individual GPU's lower until the temps are around 70+C. It will save the fans and a tiny bit of power. You can mix cards but only AMD with EthOS. Its best to keep similar speed cards together.
thanks @stoon! i think ill stick with asus strix only on this rig.. maybe with the next one will try something different, something more powerful, atm i am pretty happy with this. I have 15.4 MH/s on this single card.. i think if ill rise a bit the settings maybe will jump to 16 mh/s.
My globalfan is 90 now, is that too much ? The temp is something around 54. Should i lower the fan speed?
My globalfan is 90 now, is that too much ? The temp is something around 54. Should i lower the fan speed?
I would say the fan speed is overkill. Lower it down and save the excessive fan wear. With only one card and how cool they run, I would say you could probably lower it to 50%. I have one of mine set to 30% and it still runs at 64C but another that sits over the CPU is at %70 and is at 74C
My globalfan is 90 now, is that too much ? The temp is something around 54. Should i lower the fan speed?
I would say the fan speed is overkill. Lower it down and save the excessive fan wear. With only one card and how cool they run, I would say you could probably lower it to 50%. I have one of mine set to 30% and it still runs at 64C but another that sits over the CPU is at %70 and is at 74C
just changed to 1175/1600 and now i have 16 mh/s on one card. globalfan 70, waiting to see the temp and if it under 70 will lower the fans again to 60.
@ciprianpt on a single rail PSU, it will probably be fine to do that. I wouldn't recommend it tho. Best to run a line from the PSU to each GPU if you can.
Something strange happen this morning when i went to check the rig!
The miner was not running and the gpu temps was still high, like the miner was running. The RED sign after rig name ID is saying: rig miner is in stuck state due to possible hardware/clock issue, check all GPUs individually.
Checking ethOS log file
Trying to re-run the miner
I had to restart the rig 3-4 times till everything started normally, ethOS was acting strange, like freezing.. i wasn't able to use the terminal at all.
Something strange happen this morning when i went to check the rig!
The miner was not running and the gpu temps was still high, like the miner was running. The RED sign after rig name ID is saying: rig miner is in stuck state due to possible hardware/clock issue, check all GPUs individually.
Trying to re-run the miner
I had to restart the rig 3-4 times till everything started normally, ethOS was acting strange, like freezing.. i wasn't able to use the terminal at all.
Anyone faced such problems?
thanks!
I got that warning from Claymore's yesterday when playing around with OC and voltage, the program said to make sure I wasn't overclocking too much if I received that error a lot. Maybe back off a bit if your OC'd if it happens more?
Something strange happen this morning when i went to check the rig!
The miner was not running and the gpu temps was still high, like the miner was running. The RED sign after rig name ID is saying: rig miner is in stuck state due to possible hardware/clock issue, check all GPUs individually.
Trying to re-run the miner
I had to restart the rig 3-4 times till everything started normally, ethOS was acting strange, like freezing.. i wasn't able to use the terminal at all.
Anyone faced such problems?
thanks!
I got that warning from Claymore's yesterday when playing around with OC and voltage, the program said to make sure I wasn't overclocking too much if I received that error a lot. Maybe back off a bit if your OC'd if it happens more?
Something strange happen this morning when i went to check the rig!
The miner was not running and the gpu temps was still high, like the miner was running. The RED sign after rig name ID is saying: rig miner is in stuck state due to possible hardware/clock issue, check all GPUs individually.
Trying to re-run the miner
I had to restart the rig 3-4 times till everything started normally, ethOS was acting strange, like freezing.. i wasn't able to use the terminal at all.
Anyone faced such problems?
thanks!
I got that warning from Claymore's yesterday when playing around with OC and voltage, the program said to make sure I wasn't overclocking too much if I received that error a lot. Maybe back off a bit if your OC'd if it happens more?
what clock and mem do you use ?
On an MSI 390 I think 1150/1125 or 1250. It was the undervolting that was throwing things off though as the card runs fine at the OC settings
Hey.. here is a new update. I just got these beauties today.. i will be posting more updates soon.. make sure you also follow me on http://1stminingrig.com
Comments
ill publish soon a new post with more pictures and step by step rig assembling..
if you're feeling lucky, bump up the core another 10-25. worst thing that could happen is error messages.
@Frank_Zappa i am still learning,for sure ill test more things soon
You can mix cards but only AMD with EthOS. Its best to keep similar speed cards together.
My globalfan is 90 now, is that too much ? The temp is something around 54. Should i lower the fan speed?
thanks!
Something strange happen this morning when i went to check the rig!
The miner was not running and the gpu temps was still high, like the miner was running. The RED sign after rig name ID is saying: rig miner is in stuck state due to possible hardware/clock issue, check all GPUs individually.
Checking ethOS log file
Trying to re-run the miner
I had to restart the rig 3-4 times till everything started normally, ethOS was acting strange, like freezing.. i wasn't able to use the terminal at all.
Anyone faced such problems?
thanks!
http://1stminingrig.com/asus-strix-amd-radeon-r7-370-4gb-how-to-get-maximum-hashrate/
MSI Gaming X AMD Radeon RX 470 4GB Review: Performance, Hashrate, etc - http://1stminingrig.com/msi-gaming-x-amd-radeon-rx-470-4gb-review-performance-hashrate-etc/
Sapphire NITRO+ AMD Radeon RX 470 8GB Review: Hashrate, Power Consumption and More - http://1stminingrig.com/sapphire-nitro-amd-radeon-rx-470-8gb-review-hashrate-power-consumption/
Gigabyte Windforce OC AMD Radeon RX 460 2GB Review: Performance, Hashrate, etc - http://1stminingrig.com/gigabyte-windforce-oc-amd-radeon-rx-460-2gb-review-performance-hashrate-etc/
update: http://1stminingrig.com/mining-profitability-comparison-zcash-zec-ethereum-eth/