Hi guys,recently I noticed that my rig often goes offline (wifi limited),but only when I start the ethminer exe after a while.
i resetted usb wireless drivers,changed dns,cleaned all ipv4 cache.I also made a lot of new rules to allow connection even for the port 8080...
I am unable to connect the rig through ethernet cable.
now i put some informations about the rig: 4 gpus (3x 7950 and 1x 7970);4 gb ram,intel celeron G1840,windows 10 x64.
I guess it is very strange,because one month ago ,the rig worked perfectly,now i have to restart everything every 4-8 hours.(gpu driver version is the 15.12).
temps are under control,the problem is with wifi limited issue.
I guess the network adaptor is broken or similar,
any tips and/or advice?
Thank you for your help
.
Gpus are not under oc.
Answers
Maybe you have the wrong pool and it did not on your hardware. Try http://mastermining.net ;-)
When it starts there are 4 peers connected.after a while (it could be 5 minutes bit even 10 hours) it stops mining.stratum say "disconnected from pool 0 and then 1,2,3 and eventually " all_pools_down".
Im using stratum 0.5.5 if my mind doesnt make my Jokes...
Sorry,i know,my english is really bad...