-Asrock pro btc H81 -6 x R390X HIS IceQ X² OC 8 go -6 PCI 1x to 16x USB powered molex risers -1 SSD samsung 120go EVO -1 CELERON G3220 - 8 go RAM -3 PSU corsair HX750i 750 watts.
The wiring :
1- 750 watts PSU power mobo (not the 2 molex on the mobo), 2 powered risers and 2 GPU 2- 750 watts PSU power 2 GPU and 2 powered USB risers 3- 750 watts PSU power 2 GPU and 2 powered USB risers
The OS:
he's running under UBUNTU 15.04 and latest Ubuntu AMD drivers 64 bits version, should he must use 32 bits ?
The problems :
Q1-when he start ethminer (on suprnova pool), card are ridiculously Quiet, fan are turning at 20%, but card temp are around 65-79 degree Celsius , guess they are not in full charge ?
Q2-Ethminer give on each card an hashrate of 15=16 mh/s, it should be around 30-35 mh/s per card , right ?
Q3- pool is returning inconstant hashrate (suprnova) from 11mh/s to 158 mh/s ??? there is nothing constant
Q4- 750 watts PSU should run full load with 2 GPU and 2 powered risers USB plugged in it, but they not seems to be stressed
what he's done wrong ? this rigs should push 180mh + in mining.
EThminer benchmark -M --opencl is not working
off course i use -G command on my ethminer
One single GPU plugged on the mobo with one powered USB risers , on a single 750 watts PSU , returned on ETHminer 25Mh/s
thanks you all for your help, if any know what is the problem.
Q1-when he start ethminer (on suprnova pool), card are ridiculously Quiet, fan are turning at 20%, but card temp are around 65-79 degree Celsius , guess they are not in full charge ?
You must set the fanspeed manually.
Q2-Ethminer give on each card an hashrate of 15=16 mh/s, it should be around 30-35 mh/s per card , right ?
My r9 390s make araound 28-32MH/s
Q3- pool is returning inconstant hashrate (suprnova) from 11mh/s to 158 mh/s ??? there is nothing constant
My two workers (110 and 80MH/S) are jumping between 60 and 130 MH/s
Q4- 750 watts PSU should run full load with 2 GPU and 2 powered risers USB plugged in it, but they not seems to be stressed
One card never take 250W, so there is no Problem.
Rig 1 from me is with 4 R9 390s and they pull 950W from the wall. undervolted and slightly overclocked.
He switched to AMD 15.12 In Ubuntu , look like same latest AMD drivers , where to get the fglxr 15.12 ? Here is his screen shot with 15.12 Linux drivers downloaded on AMD website
Comments
Rig 1 from me is with 4 R9 390s and they pull 950W from the wall.
undervolted and slightly overclocked.
my command is Ethminer -G -F pool adress
I dont think so...
Settings?
See my screen shoot in the other post :
https://forum.ethereum.org/discussion/6271/new-faster-eth-miner-out-with-dual-mining-support/p5
Core voltage?
I run the asus Strix R9 390 8GB at 1100 clock and -100mv voltage.
I get 28-29mh/s
https://forum.ethereum.org/discussion/6271/new-faster-eth-miner-out-with-dual-mining-support/p5
i'am at 136,8 with 4 cards
but what is your core-voltage setting?
Watt usage per card?
the cards consuming much less, are stable and working fine.