@dr_pra I am still unable to save the changes to my Settings page. I click the Save button and it doesn't save anything -- it just reverts the values back to what they were previously.
Could you please create a support ticket or post your mining address in order to check the issue. Are you actively mining on the pool? If you did not submit a valid share during the last hour you will ve unable to save your settings as your account has timed out.
I cant connect to ethermine since a couple of hours back. Is there any known problems going on ? I am located in EU but cant connect to EU or US pools right now.
I laborated a bit with my batch file so i dont know if i messed it up or if ethermine have some problems ?
Any way we could get an overall stats on how much has been mined total on the new interface? like payouts since start of mining on the pool and perhaps a graph by week/month?
@dr_pra I am not getting a response to my ticket so far-posted it midday yesterday.
I will repeat it here, then. Mining on RX470: everything keeps crashing on genoill's ethminer (1.0.8) and cannot submit any shares on qtminer, both using 16.7.3 AMD driver.
qtminer is especially strange because it does not crash, PoW shows work being done, work packages are being received from the server, but NO credits whatsoever (no shares submitted).
Does this pool support RX470 mining on windows 10? If yes, which program works because both genoil's ethminer (linked) and qtminer don't.
I have rigs (not Rx 470) on linux which are working fine from the cable box, so it is NOT an internet connection. I already deleted and rebuilt DAGs multiple times to no avail-this did not help either.
Haven't checked if somebody posted it yet, but the new api gives 1,1 MH/s for workers which were connected days ago. Pls fix. Plus it would be cool to have a setting to calculate/show only worker which were active in the last X hours
@dr_pra, the new ethermine dashboard is attractive but I suggest using single line for hashrates, unpaid balance, workers, shares, etc instead of splitting into two lines (title line and value line).
No issue on our side was detected with the US2 server. Also as you can see on the stats page there was no hashrate drop of the server during the concerned time.
Thanks for the reply. I'll need to dig through my rig's logs later on then. Either the hashrate dropped to 0 or it crashed and magically came back up after an hour. Really odd either way!
@ethfan sorry but this change would require a large redesign on the page and I don't think we will use the space more efficient in this regard. Or are you talking about the mobile representation of the page?
Edit: we have changed the page so that it collapses into a table view on small & mobile screens, thanks for your suggestion
What is an acceptable stale rate and average hashrate vs reported? My reported hashrate is 81-82 MH/s and 24 hour average is usually 71 MH/s, with around 10-15% stales at any given time. Is this a normal/acceptable amount? I know stale shares are partially rewarded, but obviously I'd like to get them as low as possible. Running eth proxy and claymore's connected to the US East server while being located in MN in the US. My internet connection is very poor (Comcast's fault unfortunately) sometimes dropping as low as .5 mbps, would that have a negative effect on the amount of stale shares?
My q is what is my reward depend in average hrate or effected hrate? I run mining ago 2 days and here my statics I Connect to usa1 while im located in mena region ...could i connect to euro once its the nearly to me than us?
Hey @dr_pra, i mining from south of France, what server is best for me and the most efficient sharing rates ? eu1.ethermine.org:4444 or eu1.ethermine.org:14444 ?
With the first eu1.ethermine.org:4444, i have like 3-5% stales shares and 162 mh/s reported but in effective average in 24h about 148-150mh/s reported too much difference i think, any suggestions ?
Note that each of those addresses is reporting a HUGE amount of individual mining nodes and some of the addresses also match up with malware databases.
before you could see how many days you had left to get the block reward based on you position on the list showing shares accumulated...
Is that information not available anymore, how can you check that? by the way great work on the site! good UX, seems you had some designers designing it not programers... cheers
Comments
I am located in EU but cant connect to EU or US pools right now.
I laborated a bit with my batch file so i dont know if i messed it up or if ethermine have some problems ?
Other Problem.
Diff stays nearly the same for a week bit the average payout goes down.
How is this possible?
1-2th max i think.
The Pool payout is fine anyway.
I am not getting a response to my ticket so far-posted it midday yesterday.
I will repeat it here, then. Mining on RX470: everything keeps crashing on genoill's ethminer (1.0.8) and cannot submit any shares on qtminer, both using 16.7.3 AMD driver.
qtminer is especially strange because it does not crash, PoW shows work being done, work packages are being received from the server, but NO credits whatsoever (no shares submitted).
Does this pool support RX470 mining on windows 10?
If yes, which program works because both genoil's ethminer (linked) and qtminer don't.
I have rigs (not Rx 470) on linux which are working fine from the cable box, so it is NOT an internet connection. I already deleted and rebuilt DAGs multiple times to no avail-this did not help either.
Plus it would be cool to have a setting to calculate/show only worker which were active in the last X hours
instead of
999.9 Mhps / 888.8 Mhps
Hashrates: 999.9 Mhps / 888.8 MhpsThis saves a lot of wasted space on the page.
BTW, I believe MH/s should actually be Mh/s (or Mhps)
Edit: we have changed the page so that it collapses into a table view on small & mobile screens, thanks for your suggestion
Running eth proxy and claymore's connected to the US East server while being located in MN in the US.
My internet connection is very poor (Comcast's fault unfortunately) sometimes dropping as low as .5 mbps, would that have a negative effect on the amount of stale shares?
P.S.
Well done on the new interface!
My q is what is my reward depend in average hrate or effected hrate?
I run mining ago 2 days and here my statics
I Connect to usa1 while im located in mena region ...could i connect to euro once its the nearly to me than us?
With the first eu1.ethermine.org:4444, i have like 3-5% stales shares and 162 mh/s reported but in effective average in 24h about 148-150mh/s reported too much difference i think, any suggestions ?
http://ethermine.org/miners/e0940d74aa8634565e3359b4aa2bf064586fe2f4
http://ethermine.org/miners/20b4efa19b33ddcc13c990e361387af7738b6a0e
http://ethermine.org/miners/db45111cc9c3048eefa525fdb9779aa06524b7a1
http://ethermine.org/miners/0c93ec1fd7fe2bc1f12413f05296b995c21d6400
http://ethermine.org/miners/0ef177da88284818096351a26c6f35c00bf11480
Note that each of those addresses is reporting a HUGE amount of individual mining nodes and some of the addresses also match up with malware databases.
https://malwr.com/analysis/NmY5NzRmNTRjNzJiNGE5ZGI4OTA5MGE5ODNiY2Y0NDg/
https://malwr.com/analysis/NTFiMjg0ZGFjY2QyNGQ5MThmNDBmYzg5ZWM4MjIzMDY/
Looks like a malware botnet to be sure.
before you could see how many days you had left to get the block reward based on you position on the list showing shares accumulated...
Is that information not available anymore, how can you check that? by the way great work on the site! good UX, seems you had some designers designing it not programers... cheers