Downloaded claymore .. setup things.. but cant find the start.bat file.. nowhere in the downloaded and extracted files. It is mining though.. leave it like that?
Downloaded claymore .. setup things.. but cant find the start.bat file.. nowhere in the downloaded and extracted files. It is mining though.. leave it like that?
This is really going deep into the BIOS editing. A bit out of my league I'm afraid. I did the standard 1750 to 2000 copy, which gave a 3-4 Mh/s boost. Any suggestions which don't dig so deep?
I noticed a power draw of 125W a card. This is a lot I think...
This is really going deep into the BIOS editing. A bit out of my league I'm afraid. I did the standard 1750 to 2000 copy, which gave a 3-4 Mh/s boost. Any suggestions which don't dig so deep?
I noticed a power draw of 125W a card. This is a lot I think...
Try to change the Powerlimit in MSI Afterburner. Some Cards will run fine with only 50% Power Limit. This will spend some W per Card.
Bios Mod is really Deep, but it will work stable. (on your own risk)
I noticed a power draw of 125W a card. This is a lot I think...
Try to change the Powerlimit in MSI Afterburner. Some Cards will run fine with only 50% Power Limit. This will spend some W per Card.
Bios Mod is really Deep, but it will work stable. (on your own risk)
I've been able to down the power usage by about 15%, now resulting in about 110W a card. Still a lot, but when I go lower, the hash rate goes down more rapidly.
anyone has different hash rates on the same exact gpu? I’m running 6x Asus Rx580 Dual OC 8gb doing eth+sia and 4 of my cards are hashing 28.8 while two of then only do 24.4..
@greatauror28 I've found this is usually caused by one card being pushed too hard - it then causes instability among the others. Try decreasing the -decri and reducing clock speeds for all cards until they are even. The wind them back up
Comments
Price went up from 275€ to 350€
I think to quit mining all together.. prices are too high to be profitable..
Settings / cclock +200 / mclock +700 / power 75%
I am having 6 GPU setup. Soon I will update this rig to 8 GPUs.
Thanks,
Chaitanya
Getting 6 Nvidia GTX 1070, 1300 PSU, i3 processor, 128Gb Ssd, 8GB DDR5Ram, win 10 64bit
Suggestions on what MOBO i should get for this setup.
Also, I'm residing in India. Do I require to have a static IP for mining?
Which mining softwarre would you recommend? Claymore seems to be the most trusted one, and pool being nanopool?
Thanks for the help.
Getting 6 Nvidia GTX 1070, 1300 PSU, i3 processor, 128Gb Ssd, 8GB DDR5Ram, win 10 64bit
Suggestions on what MOBO i should get for this setup.
Also, I'm residing in India. Do I require to have a static IP for mining?
Which mining softwarre would you recommend? Claymore seems to be the most trusted one, and pool being nanopool?
Thanks for the help.
Getting 6 Nvidia GTX 1070, 1300 PSU, i3 processor, 128Gb Ssd, 8GB DDR5Ram, win 10 64bit
Suggestions on what MOBO i should get for this setup.
Also, I'm residing in India. Do I require to have a static IP for mining?
Which mining softwarre would you recommend? Claymore seems to be the most trusted one, and pool being nanopool?
Thanks for the help.
NVIDIA GeForce GTX 970 with 4GB of GDDR5 VRAM
8GB DDR4 SDRAM
PCI expansion: 1 PCIe x16, 1 PCIe Minicard, 1 PCIe x1
single card 3.15Mh/s
Have no clue how to get the hash rate up....
So here is what I did...Rolled back Nvidia driver to 347.52, use Genoil miner openCL. Am hashing at 15.58 to 16.25MH/s
29.1 Mh/s
0 memory errors
103w from GPU-Z
ETH-only
The System runs stable for over 18 hours up to 117 hours.
The Temp/Fan isnt absolut correct, every card runs in a different housing oder distance to another card.
I hope you enjoy it and can be work with it.
Cheers
Windows 10 / 64 bit / Claymore Miner 9.5
Asus GTX 1060-O6G
Core Clock: 0 / Mem Clock: +400 / Power Limit: 80% / Temp: 65c / Fan: 70%
Hashrate: 18,3 MH
Asus Dual GTX 1060-6G
Core Clock: 0 / Mem Clock: +800 / Power Limit: 85% / Temp: 62c / Fan: 64%
Hashrate: 22,2 MH
Asus STRIX-GTX-1060-O6G-Gaming
Core Clock: 0 / Mem Clock: +700 / Power Limit: 70% / Temp: 57c / Fan: 45%
Hashrate: 22,6 MH
Asus DUAL-GTX-1070-O8G
Core Clock: 0 / Mem Clock: +450 / Power Limit: 80% / Temp: 61c / Fan: 62%
Hashrate: 28,2 MH
MSI GTX-1070-Quick Silver-8G-OC
Core Clock: 0 / Mem Clock: +670 / Power Limit: 75% / Temp: 62c / Fan: 48%
Hashrate: 30,2 MH
MSI GTX-1060-GAMING X+ 6G
Core Clock: 0 / Mem Clock: +900 / Power Limit: 86% / Temp: 67c / Fan: 76%
Hashrate: 20,5 MH
MSI GTX-1060-GAMING X 6G
Core Clock: 0 / Mem Clock: +900 / Power Limit: 86% / Temp: 63c / Fan: 54%
Hashrate: 23,1 MH
2x geforce gtx 1060 armor oc v1
They hash 23Mh/s each.
Not bad i think.
You mean the antivirus deleted the start.bat file?
Can i keep mining without start.bat file.. what is it for anyway?
Evga 1300w
Sata 120 gb
Motherboard bt250 biostar
8gb ram
Win10 pro .64bits
* Corsair HX850
* SSD 120 GB
* 8 GB RAM
* 4x Gigabyte AORUS RX580 8GB
Modded the BIOS
* Core Clock: 1150 MHz (-200)
* Memory Clock: 2150 MHz (+150)
Got 26.5 Mh/s per GPU, totaling about 106 Mh/s.
Any suggestions for more tweaking?
There youve got some more Infos about: https://forum.ethereum.org/discussion/7687/how-to-prevent-claymore-miner-from-being-shut-down-by-antivirus Try Bios mod: https://reddit.com/r/EtherMining/comments/674evm/rx_580_bios_mods_and_performance/
cheers
I noticed a power draw of 125W a card. This is a lot I think...
Bios Mod is really Deep, but it will work stable. (on your own risk)
My 1050 ti 18,20 18,30 mh/s 105 wall
http://i.imgur.com/dACQg7F.jpg
Anyone?
Got win10 pro 64bit..
ASRock z97 anniversary mobo.
More tweaking possible to get it up?