K kool. I notice my pc keeps restarting like one hour after iam afk iam now testing it again this time iam not afk see what happens iam not sure if its a power issue from the house because i have a 300watt on the mb one 850watt on gpu1 and 500watt on gpu2. the reason for the extra 500watt is because the 850watt is lame it keeps going off with 2 cards on it its not a bronze, gold or anything like that its just a normal one....
If it goes off again then i think i really need to recheck somethings on the house or i might get some kind of afk bot macro or something
Its just about 1 hour now so iam going another 1-2 hours not afk just to be sure I wish I had the thing they use to check the power at the wall.
I have question 2 days ago I was with 1 rig 4x 280x and in my own pc 1x 390 and I was getting around 130mhs and now the 280x and the 390 are in 1 rig but I am getting something like 90-95? What is wrong? I install only the driver for the 280x is there the problem? Did I need to instal the 390 too?
I have question 2 days ago I was with 1 rig 4x 280x and in my own pc 1x 390 and I was getting around 130mhs and now the 280x and the 390 are in 1 rig but I am getting something like 90-95? What is wrong? I install only the driver for the 280x is there the problem? Did I need to instal the 390 too?
are you using -t 5?
No I dont Its working withoud -t 5 did I have to change?
Guys i need help. Tryed to start mining with my 2 amd 390 using etheminer by Genoil, but i have a problem using it. When i try to run the miner with my settings: ethminer -G -F ********** --cl-local-work 256 --cl-global-work 16384 the miner crash asking to "remove the -G" to work properly. When i remove -G and place instead --opencl-platform 0 - the miner starts but it's working not properly cause i think i start mining with my cpu (i7 6700k) cause the hashrate is around 600000. I need help(( What i'm doing wrong and what are the correct configurations??? Got 3 GTX 970 mining and they work properly. Thx
the benchmark is accurate? because I tested my card with it and it shows 15MH/s in Avg but my actual hashrate in ethereum s 12.2MH/s, is there a way to get the alll the time 15MH/s?
The ethminer benchmark does not reflect current difficulty level. Depending on gpu/mem (some are worse than others), the benchmark will report higher than actual mining rate in the terminal, or the reported rate at the pool.
@ImAMiner? Benchmarks are benchmarks, but don't reflect reality. Locally you can change the DAG used in benchmarking with -D 1.5M -M, but I still don't think it takes difficulty into consideration.
@PontiacGTX mentioned "actual hashrate in ethereum"... rate in the terminal? Effective or reported rate on the pool? They're all going to be different, especially effective rate...
Perhaps @Genoil can pipe in regarding what, if any, difficulty level is set in benchmark mode.
Comments
I just got 2 MSI R9 380 4gb http://www.newegg.com/Product/Product.aspx?Item=N82E16814127913 and they are going at 40-42mh/s.
I wanna know if this is what I should be getting any info would be greatly appreciated thank you.
I have used afterburner to lower the voltage to -50% and clocked them to 1000 core clock and 1450 memory clock. You can see the miner stats hear https://ethereumpool.co/stats/miner/index.php?address=0x7429c1de70d3416bdd6597ca2f97048e1534e7c2
This is the settings I'am using:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
export GPU_SINGLE_ALLOC_PERCENT=100
ethminer -G -F http://pool.eth.pp.ua/[email protected]@R93804gbx2 --cl-local-work 256 --cl-global-work 16384
I notice my pc keeps restarting like one hour after iam afk iam now testing it again this time iam not afk see what happens iam not sure if its a power issue from the house because i have a 300watt on the mb one 850watt on gpu1 and 500watt on gpu2.
the reason for the extra 500watt is because the 850watt is lame it keeps going off with 2 cards on it its not a bronze, gold or anything like that its just a normal one....
If it goes off again then i think i really need to recheck somethings on the house or i might get some kind of afk bot macro or something
Its just about 1 hour now so iam going another 1-2 hours not afk just to be sure I wish I had the thing they use to check the power at the wall.
that one is international, which is more expensive.
For US get 19.25 one and it is an add-on item
http://www.amazon.com/P3-P4400-Electricity-Usage-Monitor/dp/B00009MDBU
29459992 H/s
Not bad
6 x Gigabyte 380X G1 Gaming 4GB / Win 8.1 Pro 64bit / Crimson 15.12 with 6xGPU mod
Stock voltage, small overclock at 1095gpuclock/6000memclock
~120MH/s
Got a really cheap used Powercolor TurboDuo R9 280x
Voltage: 1100mv
overclock: 1150Mhz
21MH/s
Total: 75MH/s +-5MH/s
i have GPU R7 370 iwant mining ETH ...i used opencl but don"t working and eth-proxy-win to ...what should i do ?
setx GPU_FORCE_64BIT_PTR 0
export GPU_SINGLE_ALLOC_PERCENT=100
I am only with these
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_HEAP_SIZE 100
look this
will every board with this r7 onboard bring that mh/s?
http://www.amazon.de/dp/B0170TFSC8/ref=asc_df_B0170TFSC832797078?smid=A2TH2JMBZZVSOH&tag=syn_tb_avi1_bdmpce-21&ascsubtag=tb_avira_abs_prod&linkCode=df0&creative=22506&creativeASIN=B0170TFSC8&childASIN=B0170TFSC8
or
http://www.ebay.de/itm/Aufrust-PC-AMD-A10-7700K-4x3-4-GHz-8GB-Radeon-R7-Serie-2GB-/251443694111?hash=item3a8b364a1f:g:BtEAAOSwHnFVyfMa
What you are looking at is just variation/fluctuation.
Have to wait 24-48 hr at the pool to see real numbers.
Benchmark : 17.1 Mhs
Pool : 12 Mhs
ethminer is not recognized as an internal
on win 8.1 64bit 2x r9 380 4gb
any info??
What are the clocks?
Oke 33 it is then =]
@PontiacGTX mentioned "actual hashrate in ethereum"... rate in the terminal? Effective or reported rate on the pool? They're all going to be different, especially effective rate...
Perhaps @Genoil can pipe in regarding what, if any, difficulty level is set in benchmark mode.