7 gpu miner on (6 msi armor rx570 and 1 asus strix 570 on m.2 to 4x pcie)
Gigabyte z270p-d3a with mining bios (all settings set for normal mining config, -- can't remember if its on gen1 or gen2)
2x 750 +gold psus (3 gpus and the system on 1 and 4 gpu on the other)
cards have been bios modded and are set(using MSI Afterburner) to 925v 1100 core and 1950 memory
Virtual memory at 30gigs
So I've been having a really frustrating problem lately. This miner has been functioning fine for about a month now. Recently after the Monero fork I tried switching but found it to be pretty much the same profitability so I switched back to Etherium mining. When I switched back it started giving me issues.
The miner will function fine for a while (anywhere from 10 minutes to 2 days) then my Strix 570 will crash the miner or make claymore restart. When this happens its MSI Afterburner settings get reset to stock (1300 clock and 1750 mem). All the other cards seem fine.
The system will either hang and search for a pool until I remote in and restart the miner
OR windows will crash.
I have reduced the overclocks to 1850mem clock and 1000core at 925mv just to see if it stables out but it doesn't.
I switched the m.2 connector and riser with my nvidia rig (same base setup) but it still gives the same issue.
Any help would be much appreciated