Hello guys, i flashed my first gpu with hynix memory(msi 470 4gb), copied 1500 value to 1625-1750-2000 but the guide i followed say i should reach 25-26mh/s without OC and 28+ with OC, before the mod bios all stock i did 20.5mh/s.
If this is with factory values then it is normal. try to change settings in wattTool as shown on first page and it should give oyu a higher hashrate.
thx m8, yesterday i done some test and i can reach max 25mh/s with core [email protected] and mem 1875,if i up more the mem freq i have grey screen or desktop backgroung screen crash, 1875 mhz for mem is very low right?
put in on 0. try higher mem and core. if it is stable then slowly drop voltage by 10 units until freezes. when freezes then up the voltage by 10 and that will be your stable voltage for that setting. I didn't use trixx but that is the idea in every overclock program.
Hey guys i was getting 28mhz witht this mod but now only 22 for the same cards without changin anything.Any ideas?
99% your drivers are problem. Maybe auto-updated. Uninstall drivers with DDU in safemode and then install 16.9.2 drivers from guru3d. It will work great!
put in on 0. try higher mem and core. if it is stable then slowly drop voltage by 10 units until freezes. when freezes then up the voltage by 10 and that will be your stable voltage for that setting. I didn't use trixx but that is the idea in every overclock program.
Thanks drizzt, you use one program for testing the oc of cards for see errors or stability issues? i need one
@drizzt_do_urden thanks! Do you know if there is there another way to download it? The google drive link is dead and I don't have permissions to download the zip file from the forum
Looks like that didn't fix it, My PC is glitching and restarting after a few minutes mining. I'm not really sure what I should be playing with to making it stable again - help needed please!
@change GPU P3 P4 P5 P6 P7 should be 1150/930 and memory should be 2000/930 this should work if not then up the voltage a little bit. with increments of 10
1150 with 890 is very low. the card is not stable. look at the GPU clock it should be on 1150 always. try 1095 with 890. and memory should be able to go as high as 1950...
@emre07691 what kind of bios do you use? memory strap mod? 1500 or 1625? samsung responds better to the 1625 mod. but still 27.5 - 28 mhs from a 470 is okay. Above that you will get a ton of memory error if you check in hwinfo...
@emre07691 what kind of bios do you use? memory strap mod? 1500 or 1625? samsung responds better to the 1625 mod. but still 27.5 - 28 mhs from a 470 is okay. Above that you will get a ton of memory error if you check in hwinfo...
i am at the office right now i'll check it when i get home.
i use claymore 7.4 and i get 27,5-28 with newer version, i've tried v9 and v9.3 i get only 27-27,5 MH
Hi I bought the RX470 MSI Gaming X 8GB with Micron memory. But with the modded BIOS 1500> timing I can not get to more than 23MH. Can it move somehow or not?:. Thank you
try 1625 or 1750 timing. micron works better with those timings...
Hello drizzt_do_urden! Thanks to help us... I need you help.. How do I know if my MSI Radeon™ RX 470 GAMING X 4GB wil works with this mod Bios? Is there any reference such as memory so I can know that it will work? I'm asking why you said there is not a post that only works in this model: (http://www.newegg.com/Product/Product.aspx?Item=N82E16814137024) Thanks, i waiting for !
@MarlynNeves check with GPU-Z the memory type of the card. If it is Hynix memory then you can use it. if samsung or elpida then you can do the mod yourself if you want...
@MarlynNeves check with GPU-Z the memory type of the card. If it is Hynix memory then you can use it. if samsung or elpida then you can do the mod yourself if you want...
Comments
this is the result:
i'am using claymore Dual eth 9.2
is normal this low result?
Thanks
I'm running a STRIX RX470 4GB, I flashed it yesterday and got the exact same results as w0lf up from 20 Mh/s to 23 Mh/s.
I've got WattTool open and I have no idea what to do, can someone talk me though it please?
thanks!
@change on the picture you show wattman not wattTool.
This is WattTool and if you download it and open it you will see it is pretty straightforward...easy to use!
http://www.overclock.net/t/1609782/watttool-a-simple-tool-that-combines-overclocking-with-vrm-monitoring-tweaking-for-rx-400-series
Ok so I've run WattTool and changed memory p1 to 2000/920 and that crashed the PC. I've now changed it to 2000/1000 and its been OK for a few minutes.
Anything else I should be changing?
With those settings I cant mine at all, crashes during loading of claymore.
I've found some other settings on the forum for my card (Strix 4gb RX470) not sure if that makes a difference?
This is now running at high 25/low 26 mhs
i have a MSI RX 470 Gaming X 4GB with Samsung ram.
currently i am getting 27,5-28 MH, Core [email protected], memory [email protected], fan speed is 30% temp is 40-42
60-65W GPU-Z, [email protected] (EU,230V)
i can overclock it to [email protected] (28-28,5MH) and it runs fine for an our or so and then it crashes! it still crashes when i give it more volt
and that while i see people running it @2000MHZ
any tips, tools to get higher hashrate?
drivers are 16.12.1
windows 10 x64 4GB
i use claymore 7.4 and i get 27,5-28 with newer version, i've tried v9 and v9.3 i get only 27-27,5 MH
any ideas?
I need you help.. How do I know if my MSI Radeon™ RX 470 GAMING X 4GB wil works with this mod Bios? Is there any reference such as memory so I can know that it will work?
I'm asking why you said there is not a post that only works in this model: (http://www.newegg.com/Product/Product.aspx?Item=N82E16814137024)
Thanks, i waiting for !
What setting does it lower?
Mv?