I am new at mining, recently bought 1070 and i had r9 380x before, so i decided to set them up and mine a bit.
With both of them, i am pulling about 53Mh/s with ~21 on R9 380x and 33 on 1070.
Using nanopool with claymore miner.
MSI 1070 seahawk EK
running at -50% power and +700 on memory
raising clock and power limit doesn't have much effect, maybe +0,2MH but raising about 50W or more on power consumption so it's not worth it
Gigabyte R9 380X G1 Gaming
1625Mhz on memory
clock is on stock
this card could use help with power consumption because it pulls a lot. 180-220W at the moment even with -20% power
I'm using AMD crimson beta crypto drivers, tried bunch of other drivers from 15.12 to newest ones and those seem best
Others have about 18MH/s at more or less same power draw and tend to crash or act weird sometimes.
If someone has undervolted Bios for this card it would be much appreciated and maybe tighter timings on memory would be great!
Any other bits of advice would be great too guys!
I have some other older cards and hardware that just lays around collecting dust mostly so i'm thinking of using it and make one more rig.
This rig will run for start 3x R7 370 4gb and im hoping to get some cheap 1060 or something cos mbo can run 5 gpus.
Saphire nitro 4gb D5 elpida chips
Msi Gaming 4gb with hynix chips
Asus Strix 4gb not sure what chips are on that one
Any advice would be great. What drivers to use with them, maybe moded bios for them, or pointers on how to mod it and what software to use!
Thank you all!
Let your rigs run strong and cool!