@Jo3L Why you cannt get solarpanels in spain? Should fit perfect in your country
@newfulluser thank you. my cards running with 95% Fan speed noise isnt a problem. Heat is 85C per card. The rig rock stable so heat isnt really a problem. I dont have other fans
@kristofferjon well it was pretty easy to get them to 30-31mh @2100, but the problem I'm having is undervolting. Do they have the NCP81022 ? Or are you doing it on windows? It's especially odd that in MSI ab it says the vddc controller is "on-die". Also no register values for any controller I know of seem to have any effect in the VOI... Even weirder, AIDA cant identify any of the controllers in an i2c dump.. @Wolf0 maybe a hint?
@kristofferjon well it was pretty easy to get them to 30-31mh @2100, but the problem I'm having is undervolting. Do they have the NCP81022 ? Or are you doing it on windows? It's especially odd that in MSI ab it says the vddc controller is "on-die". Also no register values for any controller I know of seem to have any effect in the VOI... Even weirder, AIDA cant identify any of the controllers in an i2c dump.. @Wolf0 maybe a hint?
@kristofferjon well it was pretty easy to get them to 30-31mh @2100, but the problem I'm having is undervolting. Do they have the NCP81022 ? Or are you doing it on windows? It's especially odd that in MSI ab it says the vddc controller is "on-die". Also no register values for any controller I know of seem to have any effect in the VOI... Even weirder, AIDA cant identify any of the controllers in an i2c dump.. @Wolf0 maybe a hint?
Guys, I am trying the Dual mininer. this is the start file EthDcrMiner64.exe -epool us2.ethermine.org:4444 -ewal 0x87b817f49bD8F57a46b452c5F1ed0C8C9D1D8492 -epsw x -dpool stratum+tcp://dcr.suprnova.cc:3252 -dwal username.bananaloca -dpsw X
I just got this fixed. but now another issue. After one minute of being mining (Finally Claymores works well) I am getting a White screen and windows crashes. What could be happening?
I have a similar setup but way less organized. Yours looks great!
I have the MSI z170A Gaming M5 board instead of the Carbon and I had a lot of issues trying to set it up. Couldn't get an image on my screen after plugging in my GPUs. That's with Gen 1's and 4G enabled.
Did you have issues setting up the rigs with the MSI bios settings?
@Waagh thank you Yes the first rig needs a lot of time to setup but now it runs very smooth. I think the m5 board supports only 4-5 gpus. Did you update bios to the latest version?
Hey @Skaywalkuurrr I have the same MSI Gaming Pro Carbon Z170A and I am having problems with 7 cards (RX580), no problems with 6. My question is what motherboard BIOS are you using? MSI Latest or modified?
Comments
Arrived in 2 days good seller. The bag has Chinese markings on it so not 100% sure if they are based in UK but when they get here in 2 days who cares!
@newfulluser thank you. my cards running with 95% Fan speed noise isnt a problem. Heat is 85C per card. The rig rock stable so heat isnt really a problem. I dont have other fans
@dragonmike 30cm length is enough
@Skaywalkuurrr they have a tax if you use solar pannels... XD
@Wolf0 maybe a hint?
EthDcrMiner64.exe -epool us2.ethermine.org:4444 -ewal 0x87b817f49bD8F57a46b452c5F1ed0C8C9D1D8492 -epsw x -dpool stratum+tcp://dcr.suprnova.cc:3252 -dwal username.bananaloca -dpsw X
But it does not start. Could anyone help me?
at 28/Mh per card, did you tweak them using anything ?
our first run with one card was about 25/Mh
using the latest claymore and amd drivers.
cheers,
c
I have the MSI z170A Gaming M5 board instead of the Carbon and I had a lot of issues trying to set it up. Couldn't get an image on my screen after plugging in my GPUs. That's with Gen 1's and 4G enabled.
Did you have issues setting up the rigs with the MSI bios settings?
Yes the first rig needs a lot of time to setup but now it runs very smooth.
I think the m5 board supports only 4-5 gpus.
Did you update bios to the latest version?
@soehtet i paid around 5000$ for all
Rig over 250 hours stable without problems
Ps: I also live in Germany
@exalty no power issues at all
Thanks in advance for sharing/helping
@danx haha