Your bios work great - very big thanks for this With on exception - for 12 update card - one has hashrate ~18 Mh/s Try to re-flash, but effect is the same - could You have any idea how to check this problem ?
hello jukebox, thanks for making this mod! I flashed it today and got my cards to 29 mhs. However I can't get any of the 4 builds you have posted to be stable. Each one results in screen artifacts and driver crashes in a short time. Is there anything else I can do to boost my hash rate, maybe change the settings manually with polaris bios editor?
hello jukebox, thanks for making this mod! I flashed it today and got my cards to 29 mhs. However I can't get any of the 4 builds you have posted to be stable. Each one results in screen artifacts and driver crashes in a short time. Is there anything else I can do to boost my hash rate, maybe change the settings manually with polaris bios editor?
The only difference between the 2 are the MHz boost engine clocks and price. Would it be just better to grab lower version one and save on cost of card or the first revision better as already overclocked from stock? or this them just turning the clocks up more and making stable run thus costing more?
You can buy the "lower" version (11260-07) and flash the bios over the Bios in "silent" position. I just did a week ago for 10 RX 480 Nitro cards. The Bios on the "silent" position is the same for both variants (11260-01 and 11260-07).
HELP, I have been trying to get claymore stable on win8 or 10 with rx480. drivers keep hanging, "amd has stopped and..." I have tried every driver, clean 8 an 10 installs with and without updates, psu, cpu, cards, how are you getting it to run? thanks soo much
HELP, I have been trying to get claymore stable on win8 or 10 with rx480. drivers keep hanging, "amd has stopped and..." I have tried every driver, clean 8 an 10 installs with and without updates, psu, cpu, cards, how are you getting it to run? thanks soo much
So your cards are unlucky. Lower the clocks till you find stable settings.
Can i safely use your rom on my card or would be better that I change my own file with PBE using your timings and voltage ?
a little news: yesterday i received a new RX 480 Nitro+ OC 8GB / 11260-01-20G and it has a new bios version (never seen so far with buil date 21 september 2016) : 347X06SU.X5W
@Jukebox thanks for the v4 bios. It works very well ~ 29.93 mhs The issues I had were related to the ribbon risers. Now I installed usb risers and the system is stable.
Comments
With on exception - for 12 update card - one has hashrate ~18 Mh/s
Try to re-flash, but effect is the same - could You have any idea how to check this problem ?
Best regards
Fangir
i dotn think it is lottery ticket, becouse this hasharate is constant
i will apply this bios to unlucky one
is there a way to control settings of gpu via command line (voltage , fans, etc - ok, fans are in claymore ) ?
Coul You point the site with this CLI opptions - i cant find it on my own
Post your full config here.
If you have an integrated GPU - it's better to disable it in BIOS.
If you use monitor - it must be connected to card that is in primary PCI-E slot...
I will disbale it later on today
monitor is connected to primary PCI-E
Also post pagefile settings.
I will post it here, if this file in not enough, pls tell me
the only thing I can say - try to set for that card memclk to 2000, GPU to 1100, reboot with these settings and check hashrate again
PS: thanks Jukebox for the Bios
i checked your rom and it seems to be for RX 480 Nitro+ 8GB (and not for the RX 480 Nitro+ OC 8GB)
i have some of this card RX 480 Nitro+ OC 8GB / 11260-01-20G and the bios version is (checked with HxD) 347X06SU.X51 : original rom here https://techpowerup.com/vgabios/185490/sapphire-rx480-8192-160802
but your bios version is 347X06SU.S52 : original rom here https://techpowerup.com/vgabios/185756/sapphire-rx480-8192-160802-1 . As u can see in the techpower site, this version is for RX 480 Nitro+ 8GB (no OC)
Can i safely use your rom on my card or would be better that I change my own file with PBE using your timings and voltage ?
a little news:
yesterday i received a new RX 480 Nitro+ OC 8GB / 11260-01-20G and it has a new bios version (never seen so far with buil date 21 september 2016) : 347X06SU.X5W
here is the dump.
The issues I had were related to the ribbon risers. Now I installed usb risers and the system is stable.