RX 470 mining

12930323435

Comments

  • theclamtheclam Member Posts: 91
    yup - in ethos in your config add:
    pwr RIGNAME 3 3
    or if you have 6 gpu's
    pwr RIGNAME 3 3 3 3 3 3

  • klaasjeklaasje Member Posts: 2
    edited April 2017
    MSI RX470 Gaming X 4GB getting me 30mh/s on ETH and 740mh/s on DCR with Claymore V9.0 on ethOS
  • ciprianptciprianpt Member Posts: 219 ✭✭
    klaasje said:

    MSI RX470 Gaming X 4GB getting me 30mh/s on ETH and 740mh/s on DCR with Claymore V9.0 on ethOS

    On windows you can get around 31 mh/s and maybe 900 dcr
  • klaasjeklaasje Member Posts: 2
    yeah but i hate windows :D
  • AlushiAlushi Member Posts: 7
    cidmo said:

    @Marvell9 @MMK took ur advice and applied it to some other cards, thx again
    msi 470 4gb gpu2, still got some room to go on this card but this profile runs on all the msi 470 4gs i got

    gpu3 is a msi 480 8gb
    gpu4 is a sapphire 470 8gb

    gpu0 and1 are a 7950 and a 280x im playing with too

    cidmo said:

    @Marvell9 @MMK took ur advice and applied it to some other cards, thx again
    msi 470 4gb gpu2, still got some room to go on this card but this profile runs on all the msi 470 4gs i got

    gpu3 is a msi 480 8gb
    gpu4 is a sapphire 470 8gb

    gpu0 and1 are a 7950 and a 280x im playing with too

    hey bro can you tell me why is your fan speed at the 480 at 0% with so cool temps?
  • AlushiAlushi Member Posts: 7
    guys are you tweaking this one with claymor v9 i understand its good with crimson 15.12 only... could you pls guys post your drivers using and miner? with hashrates, thanks you
  • drRobertdrRobert Member Posts: 35
    Somebody had try it with micron this mod?
  • marikamarika Member Posts: 1
    Hello,

    I'm a noob, that's for sure. So I have built a rig based on 6x MSI RX470 Nitro+
    My hash rate per card is around 25 mhs
    Full rig power consumption: 670 -700W

    Other specs:

    Motherboard: Asrock pro btc
    CPU: Celeron 1840 lga1150

    So I have read all the 32 pages and my head have just exploded.

    Is there a simple way or a trick with my cards just to find the sweet spot between hash rate and power consumption, of course to lower PC and increase HR?
  • otheregootherego Member Posts: 26
    finally comes my 3rd sapphire oc+ rx 470 with elpida ram. i'm running 2 other rx 470 smootly to 29.5 mhs.
    the third one is very unstable even @ 1990 mhz ram....
    i'm usig modified bios with 1500 timing trap.... that was working on other card...
    so difficult sot set these one.. pls help
  • ciprianptciprianpt Member Posts: 219 ✭✭
    edited April 2017
    otherego said:

    finally comes my 3rd sapphire oc+ rx 470 with elpida ram. i'm running 2 other rx 470 smootly to 29.5 mhs.
    the third one is very unstable even @ 1990 mhz ram....
    i'm usig modified bios with 1500 timing trap.... that was working on other card...
    so difficult sot set these one.. pls help

    Try 1625 timing 1130/2100..
  • otheregootherego Member Posts: 26
    ciprianpt said:

    otherego said:

    finally comes my 3rd sapphire oc+ rx 470 with elpida ram. i'm running 2 other rx 470 smootly to 29.5 mhs.
    the third one is very unstable even @ 1990 mhz ram....
    i'm usig modified bios with 1500 timing trap.... that was working on other card...
    so difficult sot set these one.. pls help

    Try 1625 timing 1130/2100..
    I got just 27 mh/s with these traps
  • drRobertdrRobert Member Posts: 35
    otherego said:


    I got just 27 mh/s with these traps

    Do you have 4gb right?

  • ciprianptciprianpt Member Posts: 219 ✭✭
    otherego said:

    ciprianpt said:

    otherego said:

    finally comes my 3rd sapphire oc+ rx 470 with elpida ram. i'm running 2 other rx 470 smootly to 29.5 mhs.
    the third one is very unstable even @ 1990 mhz ram....
    i'm usig modified bios with 1500 timing trap.... that was working on other card...
    so difficult sot set these one.. pls help

    Try 1625 timing 1130/2100..
    I got just 27 mh/s with these traps
    I get 29.7 with those timings..
  • otheregootherego Member Posts: 26
    edited April 2017
    ciprianpt said:

    otherego said:

    ciprianpt said:

    otherego said:

    finally comes my 3rd sapphire oc+ rx 470 with elpida ram. i'm running 2 other rx 470 smootly to 29.5 mhs.
    the third one is very unstable even @ 1990 mhz ram....
    i'm usig modified bios with 1500 timing trap.... that was working on other card...
    so difficult sot set these one.. pls help

    Try 1625 timing 1130/2100..
    I got just 27 mh/s with these traps
    I get 29.7 with those timings..
    these are timings i used. also this card have a noisy fan.....amazon return.....
  • otheregootherego Member Posts: 26
    drRobert said:

    otherego said:


    I got just 27 mh/s with these traps

    Do you have 4gb right?

    yes
  • SacchingSacching Member Posts: 5
    ciprianpt said:

    otherego said:

    finally comes my 3rd sapphire oc+ rx 470 with elpida ram. i'm running 2 other rx 470 smootly to 29.5 mhs.
    the third one is very unstable even @ 1990 mhz ram....
    i'm usig modified bios with 1500 timing trap.... that was working on other card...
    so difficult sot set these one.. pls help

    Try 1625 timing 1130/2100..
    I have the same problem with sapphire nitro oc+ rx 470 with elpida memory.
    It can run stably at only 1850M-memclock.
    So, I have changed the strategy for saving power rather than gaining hashrate.
    It draws about 55w/card from GPU at 1000/[email protected]

    http://gpuz.techpowerup.com/17/04/17/5cw.png
  • drRobertdrRobert Member Posts: 35
    Sacching said:

    ciprianpt said:

    otherego said:

    finally comes my 3rd sapphire oc+ rx 470 with elpida ram. i'm running 2 other rx 470 smootly to 29.5 mhs.
    the third one is very unstable even @ 1990 mhz ram....
    i'm usig modified bios with 1500 timing trap.... that was working on other card...
    so difficult sot set these one.. pls help

    Try 1625 timing 1130/2100..
    I have the same problem with sapphire nitro oc+ rx 470 with elpida memory.
    It can run stably at only 1850M-memclock.
    So, I have changed the strategy for saving power rather than gaining hashrate.
    It draws about 55w/card from GPU at 1000/[email protected]

    http://gpuz.techpowerup.com/17/04/17/5cw.png
    Do you ahve 4 or 8 gb version?
  • SacchingSacching Member Posts: 5
    drRobert said:

    Sacching said:

    ciprianpt said:

    otherego said:

    finally comes my 3rd sapphire oc+ rx 470 with elpida ram. i'm running 2 other rx 470 smootly to 29.5 mhs.
    the third one is very unstable even @ 1990 mhz ram....
    i'm usig modified bios with 1500 timing trap.... that was working on other card...
    so difficult sot set these one.. pls help

    Try 1625 timing 1130/2100..
    I have the same problem with sapphire nitro oc+ rx 470 with elpida memory.
    It can run stably at only 1850M-memclock.
    So, I have changed the strategy for saving power rather than gaining hashrate.
    It draws about 55w/card from GPU at 1000/[email protected]

    http://gpuz.techpowerup.com/17/04/17/5cw.png
    Do you ahve 4 or 8 gb version?
    its 4gb version.
    I got it about a month ago from also amazon. (co.jp)

  • MrN1ce9uyMrN1ce9uy Member Posts: 190 ✭✭
    I'm just wondering, anyone getting over 28MH/s have any GPU memory errors in HWInfo64??
  • d3xynad3xyna Member Posts: 7
    drRobert said:

    Somebody had try it with micron this mod?

    i tried bios modding the micron memory , no luck ...
    i have MSI rx470 8gb Micron memory (attached)

    Any help would be great!
  • drRobertdrRobert Member Posts: 35
    d3xyna said:

    drRobert said:

    Somebody had try it with micron this mod?

    i tried bios modding the micron memory , no luck ...
    i have MSI rx470 8gb Micron memory (attached)

    Any help would be great!
    you did the same? you failed the part of memory edit on polaris editor?
  • d3xynad3xyna Member Posts: 7
    drRobert said:

    d3xyna said:

    drRobert said:

    Somebody had try it with micron this mod?

    i tried bios modding the micron memory , no luck ...
    i have MSI rx470 8gb Micron memory (attached)

    Any help would be great!
    you did the same? you failed the part of memory edit on polaris editor?
    that is the bios from GPUz (256 kb) - seems the saved one is different in size from the AtiFlash one (wich is 512kb)

    editing the 1625 straps to 1750 / 1875 and 2000 timings wont boot unfortunatly, maybe im just unlucky :disappointed:
  • drRobertdrRobert Member Posts: 35
    edited April 2017
    d3xyna said:

    drRobert said:

    d3xyna said:

    drRobert said:

    Somebody had try it with micron this mod?

    i tried bios modding the micron memory , no luck ...
    i have MSI rx470 8gb Micron memory (attached)

    Any help would be great!
    you did the same? you failed the part of memory edit on polaris editor?
    that is the bios from GPUz (256 kb) - seems the saved one is different in size from the AtiFlash one (wich is 512kb)

    editing the 1625 straps to 1750 / 1875 and 2000 timings wont boot unfortunatly, maybe im just unlucky :disappointed:
    I had same issue with a nitro 470 8g and i sent it back i think not all micro maybe can fix it.

    Did you try also to use 1750 for basic ref instead 1625?
  • drRobertdrRobert Member Posts: 35
    hey dude try to do the same and let me know it:



  • d3xynad3xyna Member Posts: 7
    i have watched that, no luck
  • Wolf0Wolf0 Member Posts: 329 ✭✭✭
    otherego said:

    ciprianpt said:

    otherego said:

    finally comes my 3rd sapphire oc+ rx 470 with elpida ram. i'm running 2 other rx 470 smootly to 29.5 mhs.
    the third one is very unstable even @ 1990 mhz ram....
    i'm usig modified bios with 1500 timing trap.... that was working on other card...
    so difficult sot set these one.. pls help

    Try 1625 timing 1130/2100..
    I got just 27 mh/s with these traps
    I LOVE traps!
  • otheregootherego Member Posts: 26
    edited April 2017
    i observed in my tries some card are crashing or freezing used alone. they are pretty stable instead, if used as secondary card without Display connected.
    give a try (luv traps too :-))
    Post edited by otherego on
  • Oxxaz_ethOxxaz_eth Member Posts: 5
    edited April 2017
    MSI RX 470 Gaming X 4G (Samsung memory) results:

    1750 memory straps
    Coreclock 1125, memclock 2100,

    Claymore solo eth: 28.5MH/s @170 watts from the wall
    Claymore duo eth/dcr: 29MH/s, 710MH/s @205 watts from the wall

    Temp 60 degrees on cpu with fan around 20-25%, VRM maxes out at 75 degrees.

    I do get some memory errors in HWinfo, about 2 per hour. Is this an indication that I should lower memclock?

    Edit: had wrong watt values and added temps
    Post edited by Oxxaz_eth on
  • orinityorinity SingaporeMember Posts: 84
    Took the plunge with XFX RX 470 a week ago but Amazon doesn't seem to be processing my order. Decided to go for a local retailer for the local warranty coverage. I am now choosing between MSI RX 470 Gaming X 4GB and Gigabyte RX 470 G1 Gaming 4GB. Any advice on which is a better option?
  • w0lfw0lf Member Posts: 43
    guys i bought 4 msi 470 4gb and i need help for mod the bios of my gpus for MAX saving power consuption, i checked my first gpu and has Hynix memory, what guide you follow for mod the bios? I'ts my first time..
    Thanks
Sign In or Register to comment.