Ayuda para Configurar MSI RX 480 Gaming 4GB en Ethos 1.1.6 en modo Overclock

JuanPowerJuanPower Posts: 1
buenas, tengo problemas para la configuracion para el OVERCLOCK de estas tarjetas de video con Ethos y las tengo trabajndo con una tarjeta madre MSI Z97, acualmente sin OC levanta cada una 21 de poder pero no he logrado hacer q funcionen con el OC he visto y he hecho paso a paso las indicaciones que da ethos Distro y realmente no he llegado al punto en que vea algun cambio, capaz no estoy metiendo los datos bien, alguien por favor que haya logrado el OC con estas ayudenme o si alguien sabe, pienso que la tranca esta en los valores. esto es lo que dice la guia de ethosdistro/OC, si x favor me ayudaran con una guia con los valores exactos realmente se los agradeceria

# globaldriver fglrx
# globalminer ethminer
# maxgputemp 85
# stratumproxy enabled
# proxywallet 0x0bdC4F12fB57d3acA9C3cF72B7AA2789A20d27f2
# proxypool1 us1.ethermine.org:4444
# proxypool2 us2.ethermine.org:4444
# flags --farm-recheck 200
# globalcore 1000
# globalmem 1250
# globalfan 90
# globalpowertune 20
# autoreboot false
# custompanel publicsecret
# lockscreen enabled
# ------------------------------------------------------
#
#
# EXPLANATION OF SETTINGS THAT APPLY TO ALL RIGS
#
# If using "pool" parameter, write WORKER (a placeholder variable) in place of rig name (i.e. NOT rig1, myrig, home, warehouse2, etc).
#
# globaldriver: set to amdgpu to enable support for RX 400 series, fglrx is default (available in ethOS 1.1.0+)
# globalminer: set the global miner (default is ethminer, possible options: ethminer, sgminer-gm, claymore, zcash-miner, optiminer-zcash)
# stratumproxy: enabled/disabled/miner/nicehash (enabled by default; disabled: pool option, nicehash: nicehash support, miner: internal miner proxy)
# pool: only used with stratumproxy disabled, use this if you have a network proxy or getwork pool (example: http://pool.com:port/WORKER )
# proxy wallet: the address to which this rig's proxy will mine (only used if stratumproxy is not disabled)
# proxypool1: stratum proxy's first pool (only used if stratumproxy is not disabled)
# proxypool2: stratum proxy's failover pool (only used if stratumproxy not disabled)
# flags: set desired ethminer flags here, the defaults are known good working
# maxgputemp: the temperature in C that your GPUs will trigger ethminer to turn off
# globalcore: set the global core clock of all GPUs
# globalmem: set the global mem clock of all GPUs
# globalfan: set the fan speed percent (0-100)
# globalpowertune: set the power tune setting of all GPUs (notes from dev: 20 is default/max on everything except 290/390; r9 290 should use 50)
# autoreboot: set to a number (autoreboot 3), allow rigs to autoreboot if they soft crash (max of 3 reboots, run clear-thermals to reset counter)
# custompanel: set ethosdistro.com panel ID, exactly 12 characters, first 6 is your preferred panel ID, last 6 is your private key
# lockscreen: lock the ethOS desktop upon boot (available in ethOS 1.0.7+)
#
#
# PER-RIG STYLE CONFIG SETTINGS THAT APPLY TO INDIVIDUAL RIGS (AND THEIR RESPECTIVE INDIVIDUAL GPUS)
# NOTICE: c94e13 is a SAMPLE rig/[worker]/hostname, change it to the rig/[worker]/hostname of YOUR RIG
# NOTICE: Your rig/[worker]/hostname names are assigned automatically by the OS, do not change them
#
# SAMPLE FORMAT:
# [type] [worker] [gpu0 value] [gpu1 value] [gpu2 value] [gpu3 value] [gpu4 value]
# ------------------------------------------------------
# cor c94e13 950 1000 1050 1025 980
# mem c94e13 1250 1500 1500 1250 1250
# fan c94e13 90 80 85 100 70
# pwr c94e13 10 20 15 15 20
# vlt c94e13 0 1.118 0 0 1.118
# ------------------------------------------------------
#
#
# SAMPLE FORMAT:
# [type] [worker] [value]
# ------------------------------------------------------
# driver c94e13 fglrx
# miner c94e13 ethminer
# flg c94e13 --cl-local-work 256 --cl-global-work 8192 --farm-recheck 200
# mxt c94e13 70
# reb c94e13 1
# loc c94e13 d3
# sel c94e13 1 2 4
#
# driverless c94e13 enabled
# ------------------------------------------------------
#
#
# EXPLANATION OF SETTINGS FOR INDIVIDUAL RIGS
#
# driver [worker]: set to amdgpu to enable support for RX 400 series on a single rig, fglrx is default (available in ethOS 1.1.0+)
# miner [worker]: set the miner (default is ethminer, possible options: ethminer, sgminer-gm, claymore, zcash-miner, optiminer-zcash)
# cor [worker]: set the core clock of individual GPUs on a single rig
# mem [worker]: set the mem clock of individual GPUs on a single rig
# fan [worker]: set the fan speed of individual GPUs on a single rig
# pwr [worker]: set the powertune of individual GPUs on a single rig
# vlt [worker]: set the voltage (EXPERIMENTAL, MAY NOT WORK!) of individual GPUs on a single rig
# flg [worker]: set the ethminer flags of a single rig (applies to all GPUs on the rig)
# mxt [worker]: set the maxgputemp of a single rig (applies to all GPUs on the rig)
# reb [worker]: increment this value (example: 4 becomes 5) and the single rig will automatically reboot within 10 minutes
# loc [worker]: set an maximum 8-letter code for rack/location information on a single rig (each rig MUST have a different code, or it will not report to panel)
# sel [worker]: set the GPUs that should mine, default is no sel flag set, all GPUs may mine)
# driverless [worker]: force the rig to boot without graphics driver, for debugging purposes (this will turn off mining) (available in ethOS 1.0.7+)
#
#
# PER-BIOS STYLE CONFIG SETTINGS THAT APPLY TO CLASS OF GPU, BASED ON GPU BIOS NAME
# DO NOT USE IN SINGLE-RIG MODE
# NOTICE: 113-C6711101-100 is a SAMPLE GPU bios name, change it to the GPU bios name of YOUR GPU
# NOTICE: For a list of GPU bioses, click the "GPU bioses" link in your ethosdistro.com stats panel
#
# SAMPLE FORMAT:
# [type] [bios name] [value]
# ------------------------------------------------------
# cor 113-C6711101-100 1050
# mem 113-C6711101-100 1250
# fan 113-C6711101-100 100
# pwr 113-C6711101-100 50
# vlt 113-C6711101-100 1.118
# ------------------------------------------------------
#
#
# SAMPLE RX 400 SERIES CONFIG
#
# If you have global configs defined for fglrx rigs, you must use individual rig configs for rigs that have RX 400 series GPUS.
#
# KNOWN GOOD WORKING GLOBAL CONFIG
# ------------------------------------------------------
# globaldriver amdgpu
# flags --cl-global-work 16384 --farm-recheck 200
# globalpowertune 4
# ------------------------------------------------------
#
#
# KNOWN GOOD WORKING PER-RIG CONFIG (for a 4-gpu rig)
# ------------------------------------------------------
# driver c94e13 amdgpu
# flg c94e13 --cl-global-work 16384 --farm-recheck 200
# pwr c94e13 4 4 4 4
# ------------------------------------------------------
#
#
# IN MULTI-RIG MODE, EXAMPLES OF MULTIPLE POOLS/WALLETS/PASSWORDS (available in ethOS 1.1.5)
# You can define your pool information globally. Then, your per-rig miner will retrieve the parameters.
#
#
# SAMPLE FORMAT:
# [miner]=[parameter] value
# ------------------------------------------------------
# zcash-miner=proxypool1 zec-us-west1.nanopool.org:6666
# zcash-miner=proxypool2 zec-us-east1.nanopool.org:6666
# zcash-miner=proxywallet t1XQgP5zCG8C3vMhCsDnwUkMnEtnJEqj5NK
# zcash-miner=poolpass1 x
# zcash-miner=poolpass2 x
#
# sgminer-gm=proxypool1 us1.ethermine.org:4444
# sgminer-gm=proxypool2 us2.ethermine.org:4444
# sgminer-gm=proxywallet 0x0bdC4F12fB57d3acA9C3cF72B7AA2789A20d27f2
# sgminer-gm=poolpass1 x
# sgminer-gm=poolpass2 x

Comments

Sign In or Register to comment.